1, Suitable for copper, iron, stainless steel, alloy and other products. 2, Penetrating and dissolving ability is strong.
Dosage: 10-50ml/L (The actual concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 60-85℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 1-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, Suitable for alloy, copper, iron etc products, such as watchband, watchcase, jewelry, alloy accessories, lighting and so on. 2, No sodium hydroxide and inorganic salts, minimal alkalinity.
Low use concentration, high oil tolerance, good water washing dose: 10-50ml/L (the actual use concentration depends on the condition of the workpiece, this is the laboratory test index)
Operating temperature: 60-85℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 1-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, Suitable for copper and iron products, can keep the polishing surface of the original luster. 2, High tolerance, long life.
Dosage: 20-50ml/L (The actual concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 60-85℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 1-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, It is prepared by emulsification of surfactant, osmosis and chelation of weak acid. 2, non-corrosive, unflammable, safe operation.
Dosage: 20-50ml/L (The actual concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 60-85℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 1-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, wide range of application, stainless steel products, copper and iron products, and all kinds of metal products can be used. 2, the use of low concentration, high oil pollution tolerance, long li
Strong osmotic dissolution ability, can quickly peel off the stubborn wax scale in the pores, quick spee of wax removal.
Dosage: 10-50ml/L (The actual concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 60-85℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 1-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)